Hot Water System Installation Adelaide
New and replacement hot water systems — gas, electric, solar and heat pump — supplied and installed by a licensed plumber and gas fitter.
Is it time to replace your hot water system?
Most hot water systems last 8–12 years. If yours is showing any of these signs, a replacement is often cheaper than paying for repeated repairs.
Not sure whether to repair or replace? Jack will give you an honest answer — even if that means a simple repair.
- The water isn't getting hot enough
- You run out of hot water too quickly
- The tank is leaking, rusting or sitting in a puddle
- The pilot light keeps going out
- It's making banging, popping or rumbling noises
- It's old, inefficient and pushing up your power or gas bill
- Repairs are becoming frequent or costly
Which hot water system is right for you?
Jack supplies and installs all four types, and will recommend the best fit for your home, budget and gas supply.
Gas continuous flow or storage: which suits your home?
Gas is still the most popular choice in Adelaide. Both types run on natural gas or LPG — the right one depends on your home, your household and your existing setup.
Continuous flow gas hot water
Heats water only when you turn on a tap, so you never run out and don't pay to keep a tank hot. Compact and wall-mounted. Ideal for most homes on natural gas.
Gas storage hot water
Keeps a tank of hot water ready to go. Simple, reliable and often the easiest like-for-like swap for an existing storage unit. Good for homes with several showers running at once.
| Feature | Continuous flow | Gas storage |
|---|---|---|
| Hot water supply | Endless | Limited by tank size |
| Space needed | Small, wall-mounted | Larger floor-standing tank |
| Running costs | Lower — no standby heating | Higher — keeps the tank hot |
| Upfront cost | Usually higher | Usually lower |
| Best for | Most homes, small spaces, saving on gas | Like-for-like swaps, high simultaneous demand |
Jack will look at your current setup, gas supply and household size and recommend the right type and size — with no upsell.
What's included when Jack installs your system
No hot water? Jack's open 24/7.Call now and he'll talk you through your options.
Call 0421 570 166Your new hot water system in three steps
Call or send a photo
A photo of your current unit and its compliance plate often means Jack can quote on the spot.
Get a fixed, upfront price
Your options explained in plain English, with the price agreed before any work starts.
Installed, tested & certified
Old unit removed, site cleaned up, and a Certificate of Compliance where required.
What Adelaide homeowners say
“Jack installed my new hot water system and provided excellent service from start to finish. His customer service was outstanding, and he took the time to clearly explain everything.”
“Jack came out to look at my hot water unit not long after I contacted him… Jack is one of the most honest and professional plumbers I have met.”
“He has done a number of jobs for me over the years from installing my new gas water heater… He's friendly and reliable and gets the job done.”
Licensed hot water installers in Adelaide
Hot water systems must be installed by a licensed plumber, and gas systems by a licensed gas fitter. A poor installation can cause leaks, gas and carbon monoxide risks, unreliable performance, and problems with your warranty or home insurance.
Jack is a licensed plumber and gas fitter. Every system is installed to Australian Standards and the manufacturer's guidelines, and you receive a Certificate of Compliance where required.
Hot water installation across Adelaide's north-east
Jack installs and replaces hot water systems throughout Adelaide's north-eastern and eastern suburbs. Not on the list? Give him a call — he travels further for the right job.
Hot water installation questions
I've got no hot water. Can you help now?
Yes. Jack is open 24 hours, 7 days a week. Call 0421 570 166 and he'll talk you through your options and get a replacement organised as quickly as possible.
Do you install electric, solar and heat pump hot water systems too?
Yes. Jack supplies and installs gas, electric, solar and heat pump systems, and will recommend the best fit for your home, budget and gas supply.
How much does a new hot water system cost in Adelaide?
It depends on the type, size and brand of system, and on how much the connections need to change. Jack gives you a fixed, upfront quote before any work starts, so there are no surprises.
Should I choose gas continuous flow or storage?
Continuous flow suits most homes: endless hot water, lower running costs and a compact wall-mounted unit. Storage can make sense for a straight swap or where several showers run at once. Jack will recommend the right option for your home.
Do you install LPG (bottled gas) hot water systems?
Yes. Jack installs gas hot water systems on both natural gas and LPG.
Will I get a Certificate of Compliance?
Yes. As a licensed plumber and gas fitter, Jack provides a Certificate of Compliance for hot water installation work where required.
Do you take away the old hot water system?
Yes. Removal and disposal of your old unit is included as standard.
Which brands do you install?
Rheem, Rinnai, Bosch, Thermann, Dux, Aquamax, Solahart, Chromagen, Edwards, Apricus and Stiebel Eltron, along with other leading brands on request.
Ready for reliable hot water?
Send Jack a few details for a free, fixed quote. He's open 24 hours, 7 days.
Prefer to talk? Call or text any time0421 570 166Open 24 hours, 7 days a week